- +86 13931792766
- Cangzhou, Provinsi Hebei, Cina
Stainless steel butt-weld eccentric reducers are used for horizontal pipe size transitions involving corrosive or high-purity media; they can be installed with the flat side facing up or down to minimize the risks of gas entrapment, liquid accumulation, and cavitation.
Diproduksi dengan peralatan CNC canggih dan proses yang telah terbukti, flensa, tikungan pipa, dan alat kelengkapan kami memberikan dimensi yang akurat, kinerja penyegelan yang stabil, dan pemasangan yang dapat diandalkan di seluruh aplikasi industri yang menuntut.
Standards: GB/T 12459-2025, GB/T 13401-2025; export projects may comply with ASME B16.9-2024.
Structure/Dimensions: Stainless steel eccentric reducer; specify large end × small end, wall thickness for both ends, length, and alignment (flat-top or flat-bottom); ASME B16.9 covers NPS 1/2–48 (DN15–1200), with wall thickness determined by the connected piping Schedule (Sch) or design thickness.
Koneksi: Butt-weld; tipe bevel dan dimensi permukaan akar harus dikonfirmasi berdasarkan prosedur pengelasan dan spesifikasi proyek.
Material: Stainless steel such as ASTM A403 WP304/304L, WP316/316L, etc.; material grade, seamless/welded type, heat treatment, and NDT requirements must be clearly specified at the time of inquiry.
Peringkat Tekanan: Fitting butt-weld umumnya tidak membawa peringkat “Kelas” mandiri; kapasitas bantalan tekanan ditentukan oleh bahan, ketebalan dinding, suhu, dan kode desain perpipaan yang berlaku.
Ordering/Acceptance: Confirm NPS/DN, port diameters, wall thickness/Sch, structural dimensions, seamless/welded type, material grade, heat treatment, bevel details, and NDT requirements; pressure-bearing capacity of butt-weld fittings is verified based on material, wall thickness, temperature, and piping design codes.
