- +86 13931792766
- Cangzhou, Provinsi Hebei, Cina
This product display features a range of stainless steel elbows, tees, and bends: elbows are used for standard-angle directional changes, tees for branch distribution, and bends for larger-radius turns that minimize weld joints. They are suitable for systems handling corrosive or high-purity media.
Diproduksi dengan peralatan CNC canggih dan proses yang telah terbukti, flensa, tikungan pipa, dan alat kelengkapan kami memberikan dimensi yang akurat, kinerja penyegelan yang stabil, dan pemasangan yang dapat diandalkan di seluruh aplikasi industri yang menuntut.
Elbows/Tees: In accordance with GB/T 12459-2025, GB/T 13401-2025, or ASME B16.9-2024; specify nominal size, wall thickness, radius/branch size, and seamless or welded construction.
Bends: In accordance with project drawings; for induction-bent pipes used in long-distance transmission systems, ASME B16.49-2023 may be referenced.
Materials: Stainless steel such as ASTM A403 WP304/304L, WP316/316L, etc.; base pipe grades for bends shall comply with applicable pipe standards.
Connections: Typically butt-weld; beveling and surface finish must meet welding and cleanliness requirements.
Pressure Rating: Determined by material, wall thickness, thinning during forming, temperature, and piping design codes; flange pressure classes do not apply directly.
Ordering/Acceptance: Confirm NPS/DN, port sizes, wall thickness/Schedule, dimensional details, seamless/welded type, material grade, heat treatment, beveling, and non-destructive testing (NDT); the pressure rating of butt-weld fittings is verified based on material, wall thickness, temperature, and piping design codes.
